Description
Tetrosyl Process 540 2K HS Primer is a fast drying acrylic primer for use under basecoats and topcoats. When used with aqua-t basecoat it provides excellent adhesion and appearance. At less than 540 g/L VOC when ready for use, it is fully compliant with all relevant EU legislation for 2007 and beyond. N.B. Etch Primer is recommended for use on Aluminium and Galvanised surfaces.
Surface Preparation
Prepare panel before application using Tetrosyl Pre-Wipe degreaser PWD005 to remove any contaminants.
Mixing Instructions
(Wet-on-Wet) Volume: Mix 4 parts Primer with 1 part Activator (Fast or Standard) and 1 part Thinner
Weights for 1Kg: Mix 760g Primer with 130g Activator (Fast or Standard) and 110g Thinner
Mixing Instructions (Primer Filler) Volume:
Mix 4 parts Primer with 1 part Activator (Fast or Standard) and 0.5 parts Thinner
Weights for 1Kg: Mix 805g Primer with 135g Activator (Fast or Standard) and 60g Thinner
Application
- 2 full coats with 5 - 10 minutes flash off between coats
- 15 minutes flash off at 20 - 25°C before baking.
- Clean with Tetrosyl Gunwash
Baking / Curing Time:
15 - 30 minutes at 60°C metal temperature ( depending on film build)
Infrared: 10 - 20 minutes (depending on film build)
Air Dry: Overnight (at least 16 hours at 20 - 25°C ).
Sanding
400 - 500 dry.
800 - 1000 Wet.
ENVIRONMENTAL PROTECTION/SAFETY PRECAUTIONS Dispose of empty packs in a responsible manner. Store container in an upright position and secure when transported. Activator contains Isocyanates, wear suitable PPE.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.